Index of /slackware/images/mangopi_mq_pro

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[ ]slarm64-current-riscv64-xfce-mangopi_mq_pro-6.1.53-build-20230919.img.zst.sha2562023-09-19 10:27 140  
[ ]slarm64-current-riscv64-xfce-mangopi_mq_pro-6.1.53-build-20230919.img.zst2023-09-19 10:15 1.7G 
[ ]slarm64-current-riscv64-server-mangopi_mq_pro-6.1.53-build-20230919.img.zst.sha2562023-09-19 07:42 142  
[ ]slarm64-current-riscv64-server-mangopi_mq_pro-6.1.53-build-20230919.img.zst2023-09-19 07:37 816M 
[ ]slarm64-current-riscv64-core-mangopi_mq_pro-6.1.53-build-20230919.img.zst.sha2562023-09-19 06:52 140  
[ ]slarm64-current-riscv64-core-mangopi_mq_pro-6.1.53-build-20230919.img.zst2023-09-19 06:49 580M 
[ ]boot-20230919.tar.xz2023-09-19 06:27 338K 
[DIR]kernel/2023-09-17 15:12 -  
[ ]boot-20230610.tar.xz2023-06-10 20:18 338K 
[ ]boot-20230223.tar.xz2023-02-23 09:09 336K 
[ ]boot-20230219.tar.xz2023-02-19 03:59 336K 
[TXT]README.TXT2023-02-12 19:16 818  

Installation
------------------
Unpack the IMAGE file and copy the image an SD card: (assuming SD card at /dev/mmcblk0):

  # zstd -d slarm64-current-*-core-*-build-*.img.zst
  # dd if=slarm64-current-*-core-*-build-*.img of=/dev/mmcblk0 bs=1M

or unpack directly to the card

  # zstdcat slarm64-current-*-core-*-build-*.img.zst > /dev/mmcblk0


Instalation eMMC/NAND/USB-HDD
------------------
to transfer a system with the SD to eMMC, you need to boot from the start and run the script:
  # transfer-to-disk


Default Login
------------------
login: root


Debug
------------------
speed: 115200
pins:
    Pin 8/10                   is TX0/RX0
    Pin 11/13                  is TX1/RX1
    Pin 32/22                  is TX2/RX2
    Pin 6/9/14/20/25/30/34/39  is GRD (black)

example: screen /dev/ttyUSB0 115200,cs